MAGNEHELIC DWYER MODEL 2000-100PA

Dwyer Magnehelic Series 2000 Maintenance-free and reliable differential pressure manometer The Magnehelic, series 2000/ 2300, is a differential pressure measuring gauge with an analogue display for surveilling low pressures and differential pressures. Classical fields of application are filter monitoring or room pressure monitoring. Apart from visualizing differential pressures the Magnehelic can also be used for measuring gage pressure and negative gage pressure and for monitoring flow and volume flow. Thanks to its high resistance against overpressure the Magnehelic differential pressure gauge is very reliable and absolutely maintenance-free. It shows the measuring results on its analogue display, works independent from any external power source and is therefore universally usable. The technical specifications of the Magnehelic are available on this homepage. Manufacturer of the Magnehelic differential pressure gauge is the company Dwyer Instruments, Inc.. We, the company Briem Steuerungstechnik GmbH, are specialised in the distribution of Magnehelic gauges, accessories and related services in the German-speaking world and beyond. We draw on more than 30 years of experience with the Magnehelic and it’ s safe to say that we will find a solution for your field of application. A large number of Magnehelic differential pressure gauges are in stock in our warehouse, therefore we are confident we can accommodate almost any requirements on short notice. We also offer all kinds of useful accessories for the Magnehelic. The Magnehelic differential pressure gauge is available in a large variety of standard measuring ranges from 0-30 Pa to 0-30 kPa. We also offer the Magnehelic with zero-centre scales, which gives you the possibility to visualize gage pressure and negative gage pressure within the chosen measuring range. If you don’ t find a suitable measuring range amongst the numerous standard types we can also create a customized scale for your application. One main issue we focus on are the different mounting options. Our product line covers housings for wall mounting made of plastic or stainless steel, various kinds of mounting brackets and even front plates made of stainless steel for flush mounting which allow the integration of the Magnehelic into walls and other smooth surfaces. The bezels for the Magnehelic gauge are available in stainless steel or painted in the RAL-colours, depending on the application. Customized scales support the readability and interpretation of the measuring results of the Magnehelic. We offer special scales with range markings highlighted in colour individually adapted to your measuring task. For all customers who wish to advertise with their company logo we offer special scales showing said logo just below the scaling. We also gladly calibrate your Magnehelic gauge in our calibration laboratory. For this purpose we own several DKD-approved calibrators. Spesifications : Service: Air and non-combustible, compatible gases. ( Natural Gas option available.) Note: May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi. Wetted Materials: Consult factory. Housing: Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test. Accuracy: ± 2% of FS ( ± 3% on -0, -100PA, -125PA, -10MM and ± 4% on -00, -60PA, -6MM ranges) , throughout range at 70° F ( 21.1° C) . Pressure Limits: -20 in Hg. to 15 psig.† ( -0.677 bar to 1.034 bar) ; MP option; 35 psig ( 2.41 bar) , HP option; 80 psig ( 5.52 bar) . Overpressure: Relief plug opens at approximately 25 psig ( 1.72 bar) , standard gages only. See Overpressure Protection note on Catalog page. Temperature Limits: 20 to 140° F.* ( -6.67 to 60° C) . Size: 4 " ( 101.6 mm) diameter dial face. Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations. Process Connections: 1/ 8 " female NPT duplicate high and low pressure taps - one pair side and one pair back. Weight: 1 lb 2 oz ( 510 g) ; MP & HP 2 lb 2 oz ( 963 g) . Standard Accessories: Two 1/ 8 " NPT plugs for duplicate pressure taps, two 1/ 8 " pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. ( Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.) Untuk Info dan Pemesanan Hubungi : DARMATEK Contact : Subarkah Telpon : 021-71031268 Fax : 021-78890541 H P : 081283804273/ 085774067221 Email : subarkah18@ yahoo.co.id Gmail : darmatek1@ gmail.com Pin BB : 7512CBB7 Y M : cs_ darmatek Web : http: / / www.darmatek.com Link : http: / / darmatek.indonetwork.co.id http: / / darmatek01@ blogspot.com