Megger MIT200 series Pocket Insulation and Continuity Tester

Description :

The Megger MIT200 series digital/analog handheld insulation resistance tester measures insulation resistance, voltage, and continuity in electrical installations, building maintenance, and electrical testing. The average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform. The dual LCD screen indicates test results either digitally or with an analog arc function to replicate the response of analog meters.

The tester measures insulation resistance from 0 to 1,000 megohms, voltage from 25 to 600V, and continuity from 0.01 to 100 ohms. A continuity buzzer indicates continuity of 2 ohms or less. The unit has a test inhibit function that prevents testing on circuits carrying over 50V.

The tester is safety rated to Ingress Protection 40 (IP40) for protection against accidental contact with hazardous parts, and to European Standard EN61010-1, Category II, 300V and Category I, 600V. The Megger MIT200 series is commonly used by electricians and electrical contractors.

Spesification:

Continuity testing range : 0.01 to 100 Ohms

Insulation resistance range : 0 to 1,000 megohms

Voltage testing range : 0 to 600V AC/DC

Voltage test inhibit level : 50V

Power supply : 6 AA alkaline batteries

Weight : 550g / 1.2 lbs.

Safety standard met : International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 600V

Mechanical standard met : IP40, for protection from accidental contact with hazardous parts

Dimensions : 195 x 98 x 40mm / 7.7 x 3.9 x 1.6 inches

=========================

Untuk Info dan Pemesanan Hubungi :
DARMATEK
Contact : Subarkah
Telpon : 02191872977
H P : 081283804273 /085774067221
WA : 0819 3263 2003
Email : subarkah18@ yahoo.co.id
Gmail : darmatek1@ gmail.com
Pin BB : 7512cbb7
Y M : cs_ darmatek
Web : http www.darmatek.com