PROTEK 3290N RF Signal Strength Analyzer

Protek 3290N Hand-Held 2.9GHz RF Signal Strength Analyzer Protek 3290N is a high quality hand-held style RF Field Strength Analyzer with wide band reception ranging from 100kHz to 2900MHz. The 3290-N is a compact and lightweight portable analyzer and is a must for RF technicians. Ideal for testing, installing and maintenance of Mobile Telecommunications Systems, Cellular Phones, Cordless Phones, CB Radio, Paging Systems, Cable TV and Satellite TV Reception Systems, Hidden Camera Detection and Teletapping Detection. Comes with Carrying Case, Software, Manual, Ear Phone, Coax Cable, Holster, Batteries ( 6AA) , RS-232C Cable, Connector, Antenna and Carrying Strap. Audio output with built-in speaker -- Detachable antenna included -- Back-lit display -- All functions are menu selected -- Instrument setups & display data may be stored in memory -- Hard copy printer output of spectrum and bar graph displays -- The Protek 3290 N is ideal for IEEE 802.11 applications, Cellular Telephones, RF paging systems, Indoor repeaters, Surveillance applications Features: Frequency Range: 100KHz ~ 2.9GHz WFM/ NFM/ AM/ SSB modulated signals may be measured 125 Ch/ sec scan rate High sensitivity ( -117dBm max) Signal Levels up to 160Channels can be displayed simulaneously on the LCD Sweep Trigger Mode: Free Run, Single Run, Continuous Wave, Squelch Run Sweep Speed: 500 to 2000msec LED Backlight LCD ( 192x192 dots) PLL tuning system for precise frequency measurement and tuning Built-in Frequency Counter RS232C interface Built-in speaker Hand-Held and battery operated Major differences between 3290N and 3290 Frequency resolution of 3290N was improved compared to 3290. The 3290N provides you with more convenience because it has additional functions such as Marker and Delta Marker that the 3290 does not have. The 3290N can be reached to Menu much faster through the changed shortcut key function instead of previous tree structure. The accuracy of 3290N was enhanced through more segmented calibration The 3290N provides the GUI program which is capable of bi-directional control for user. The firmware can be upgraded easily via RS-232C. The reference level can be adjusted. The 3290N has a user-friendly icon display function. The 3290N has more than 10 times of data memory compared with 3290. Specifications Frequency Frequency Range 100 KHz to 2.9 GHz Resolution 3.1255 kHz Accuracy TXO: ± 3ppm Display ± 1.5ppm Modulation W-FM: 180 kHz N-FM 12.5 kHz AM/ SSB 2.4 kHz Step Range AM/ SSB: 2.5 kHz Fixed FM Multiple of Span Range AM/ SSB: 400 kHz Fixed FM Multiple of 1 MHz Frequency Selection Start, Stop, Center Span Setup Amplitude Measurement Range -20 dBm to -100 dBm Average Noise Level -100 dBm Amplitude Units dBm, dBmV, dBuV Reference Level Accuracy ± 2 dB Reference Level Range + 20 dBm to -70 dBm Log Scale 10dB/ DIV Internal Atten 10dB Sweep Speed 500 to 2000 msec Trigger Source N-FM, W-FM, AM, SSB Trigger Mode Free Run, Single Run, Continuous Wave, Squelch Run Trigger Level TTL Level Marker Modes Marker, Delta Marker Memory Trace Storage 100 Waves Setup Storage 100 States Display Type Mono STN LCD Resolution 192 x 192 LCD Backlight On/ Off/ Auto Mode Spectrum, Multi Bar Input RF Input Connector N Type Female, 50 ohm Maximum Input Power Max. + 10 dBm, 5V RMS Frequency Counter Range 9 MHz to 2.9 GHz Resolution 7 Digits Sampling Time 1 sec Input Impedance 50 ohm Max. Input Voltage Max. 5 Vrms RF Input Connector BNC type, 50 ohm Data Memory 10 data General Specification Operation Temperature 0 to 40 deg Humidity 35RH to 85RH Storage Temperature -10 to 50 deg. Size 9.5 " H x 4.0 " W x 1.8 " D Weight 1.4 lbs = = = = = = = = = = = = = = = = = Untuk Info dan Pemesanan Hubungi : DARMATEK Contact : Subarkah Telpon : 021-71031268 Fax : 021-78890541 H P : 081283804273/ 085774067221 Email : subarkah18@ yahoo.co.id Gmail : darmatek1@ gmail.com Pin BB : 7512CBB7 Y M : cs_ darmatek Web : http: / / www.darmatek.com Link : http: / / darmatek.indonetwork.co.id http: / / darmatek01@ blogspot.com